CANDLE MATH / 2026-11-16

How many 4 oz candles does 10 lbs of wax make?

About 50. Ten pounds is 4,536 g, and a 4 oz tin takes roughly 90 g of wax, so 4,536 ÷ 90 = 50.4. Allow 3% pour loss and plan on 49. If your tins take 3.5 oz (99 g), the same slab makes 46.

A supply record, coins, wax flakes, a jar and a blank calculator on a workbench.
Batch math: wax in, candles out, loss accounted for.

The short answer

Ten pounds of wax is 4,536 g. A 4 oz tin takes about 90 g of wax per fill, so the slab yields roughly 50 candles. If your tins take 3.5 oz (99 g), the same slab makes 46. The difference between those two answers is one number — grams per fill — and nothing else.

Wax per 4 oz candleCalculationCandles from 10 lb
3.0 oz / 85 g4,536 ÷ 8553
3.2 oz / 90 g4,536 ÷ 9050
3.5 oz / 99 g4,536 ÷ 9946
3.8 oz / 108 g4,536 ÷ 10842

Those are arithmetic answers. Real batches land 1-3 candles lower because wax stays behind in the pitcher, the pour spout, and the trimmings. The gram figure per fill comes from the container, and how much a candle weighs walks through that measurement.

Three variables decide the count

Fill weight. The only figure that matters. A 4 oz tin is a volume class, not a weight; measure one fill and use that gram figure.

Loss. Plan on 3% for a clean pour and 5% if you work in small batches. Ten pounds then behaves like 9.7 lb, and the count drops by one or two.

Fragrance. Oil adds weight but does not consume wax, so it does not reduce the number of candles. It does change the total mass you handle: 50 candles at 8% need 4,536 g wax plus 363 g oil, about 10.8 lb of material in the pitcher across the run.

Worked example at 3.2 oz per fill

Wax on hand: 10 lb = 4,536 g. Fill weight: 90 g. Divide: 50.4. Apply 3% loss: 48.9. The realistic answer is 49 candles, with 40 g of wax left over — not enough for a 50th.

Fragrance for the run: 4,536 × 0.08 = 363 g. Wicks: one per candle, 49. Containers: 49, plus one spare because a chipped tin always appears.

If your tins are not 4 oz

Swap the fill weight and the formula holds. An 8 oz jar at 176 g gives 25 candles from the same slab; a 16 oz jar at 352 g gives 12. This is why suppliers quote yields by weight range rather than a single number — the container decides, not the slab. For a soy-specific batch figure, use the soy wax calculator; for cost per finished candle, the cost calculator takes the same inputs.

FAQ

How many 8 oz candles does 10 lb of wax make?

About 25. An 8 oz jar takes roughly 176 g of wax; 4,536 ÷ 176 = 25.8, then subtract pour loss.

Does fragrance oil reduce the number of candles?

No. Fragrance is added on top of the wax weight, so wax per candle stays the same. It only increases the total material you handle.

Why do suppliers say 45-50 for 10 lb?

They assume a 3.0-3.5 oz fill, which is the usual range for a 4 oz tin. Measure your own tin to get the number for your batch.

How much wax is left after 50 candles?

At 90 g per fill, 50 candles use 4,500 g, leaving 36 g — below one more fill.

Open the wax calculator — enter your own jar size and get grams of wax per fill.

Source notes

Densities are the melted-wax figures published in supplier technical sheets (soy 0.86 g/mL, paraffin 0.90 g/mL, beeswax 0.96 g/mL, coconut 0.92 g/mL). Fluid-ounce and pound conversions use the US customary definitions: 1 fl oz = 29.57 mL, 1 lb = 453.6 g. Fill heights assume the 10-15% headspace that most container suppliers recommend. Every number below is arithmetic on those inputs, not a supplier quote.