CANDLE MATH / 2026-11-16
How much does a candle weigh?
A 4 oz tin holds about 85-91 g of wax and weighs 92-98 g once 8% fragrance is added. An 8 oz jar holds 170-181 g of wax, a 16 oz jar 340-363 g. The label gives volume; weight depends on wax density and how much headspace you leave.

The short answer, by container size
A candle weighs less than its container's label suggests. The label gives fluid ounces — volume — while wax is sold and poured by weight. Take a 4 oz tin: 4 fl oz is 118 mL of space, but you leave 10-15% headspace and soy wax melts at 0.86 g/mL, so one fill holds about 90 g of wax, or 3.2 oz. Finished weight, after 8% fragrance, lands near 97 g.
| Container (labelled) | Usable volume | Wax by weight | With 8% fragrance |
|---|---|---|---|
| 4 oz tin | ~100 mL | 85-91 g (3.0-3.2 oz) | 92-98 g |
| 6 oz tin | ~150 mL | 128-137 g (4.5-4.8 oz) | 138-148 g |
| 8 oz jar | ~200 mL | 170-181 g (6.0-6.4 oz) | 184-196 g |
| 12 oz jar | ~300 mL | 255-272 g (9.0-9.6 oz) | 275-294 g |
| 16 oz jar | ~400 mL | 340-363 g (12-12.8 oz) | 367-392 g |
The ranges come from two choices, not measurement error: how much headspace your supplier recommends, and which wax you pour. Narrow them by weighing one finished candle on a kitchen scale, then adjust the batch factor instead of guessing again. Once you have that gram figure, the wax calculator turns it into a batch in one step.
Why the label says 4 oz but the wax weighs 3.2 oz
Fluid ounces measure volume; wax is bought by weight. Water is the bridge most people carry in their head — 1 fl oz of water weighs about 1 oz — but wax is lighter than water, and melted soy is lighter still than set soy. That gap is the whole story: 4 fl oz of water is 118 g, while 4 fl oz of soy wax is 102 g before headspace, and 90 g after it.
Once you know the density, the arithmetic is short: volume in millilitres × density in g/mL = grams of wax. For a cylindrical jar, volume is π × radius² × fill height. A 70 mm diameter jar filled 60 mm high holds 231 mL, which is 199 g of soy wax.
Density by wax type
Same jar, different wax, different weight. The spread is about 10% across the common candle waxes, which is enough to throw a batch count off by four or five candles on a 10 lb slab.
| Wax | Melted density | 100 mL weighs | Note |
|---|---|---|---|
| Soy (container blend) | 0.86 g/mL | 86 g | Most common for jars; slight shrink on cooling |
| Paraffin | 0.90 g/mL | 90 g | Denser, holds a sharper top surface |
| Coconut | 0.92 g/mL | 92 g | Often blended with soy; creamy set |
| Beeswax | 0.96 g/mL | 96 g | Heaviest of the four; pillar work |
Blends behave additively to within a gram or two per 100 mL. A 70/30 soy-coconut blend sits at 0.878 g/mL, so a 200 mL jar takes 176 g instead of 172 g. If you pour soy, the soy wax calculator already applies the 0.86 g/mL figure for you.
Fragrance changes total weight, not wax weight
Fragrance load is expressed against wax mass, so it adds weight without reducing the wax you pour. At 8% on 90 g of wax you add 7.2 g of oil; at 10%, 9 g. The finished candle is heavier by exactly that amount, which is why the third column in the first table is 7-8% above the second.
Do not fold fragrance into the wax figure when counting candles per slab. It is a separate line item, and mixing the two is the most common reason a batch comes up short at the last jar.
Weighing one candle beats any table
Tables give you a starting number; one measurement gives you your number. Pour a single test candle, let it cure 24 hours, and weigh it against the empty container. The difference is your real fill weight, including the wick and any dye. Divide your wax purchase by that figure and you have a batch count that survives contact with reality.
Keep that single number on the shelf label. Every future batch then starts from a measured gram figure rather than a conversion. When you want the money side of the same fill, hand the grams to the candle cost calculator.
FAQ
Does a candle weigh more than its container label?
Usually less. Labels give fluid ounces (volume); a 4 oz tin typically holds 85-91 g of wax, about 3.0-3.2 oz by weight.
How much does an 8 oz candle weigh?
About 170-181 g of wax, or 184-196 g finished with 8% fragrance. The exact figure depends on headspace and wax density.
Do I weigh wax before or after melting?
Before. Weight does not change with melting; only volume does. Weigh solid flakes or pellets, then melt.
Why does my candle weigh less than the batch said?
Either headspace was larger than assumed or the wax is lighter than the density you used. Weigh one finished candle to correct the factor.
Open the wax calculator — enter your own jar size and get grams of wax per fill.
Source notes
Densities are the melted-wax figures published in supplier technical sheets (soy 0.86 g/mL, paraffin 0.90 g/mL, beeswax 0.96 g/mL, coconut 0.92 g/mL). Fluid-ounce and pound conversions use the US customary definitions: 1 fl oz = 29.57 mL, 1 lb = 453.6 g. Fill heights assume the 10-15% headspace that most container suppliers recommend. Every number below is arithmetic on those inputs, not a supplier quote.
- WAXWEIGH: Soy wax calculator — the batch-weight method used here.
- WAXWEIGH: Candle cost calculator — turns the same weights into cost per candle.
- WAXWEIGH: Wax data reference — density and melt-point table.